No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionAccess V100R006C20 on FusionCloud V100R006C10 Software Installation Guide 11 (Microsoft AD)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Updating an Image

Updating an Image

After an image is registered successfully, if the image cannot be displayed in the image list on the ServiceCenter tenant portal, you can use the method described in this section to update the image attributes.


You have obtained the reverse proxy IP address of the External API plane of the FusionSphere OpenStack controller node, the password of user fsp, and the password of user root.


  1. Use PuTTY to log in to the controller node of the FusionSphere OpenStack system as user fsp.

    Username: fsp; default password: Huawei@CLOUD8

  2. Run the following command and switch to user root by entering its password:

    su - root

    The default password is Huawei@CLOUD8!.

  3. Run the following command to disable user logout upon system timeout:


  4. Import environment variables. For details, see Importing Environment Variables.
  5. Run the following command to update the image information:

    • To update the KVM image, run the following command:

      glance image-update --property virtual_env_type=FusionCompute --property __support_xen=true IMAGE_ID

    • To update the FusionCompute image, run the following command:

      glance image-update --property virtual_env_type=FusionCompute --property __support_kvm=true IMAGE_ID

Updated: 2019-07-01

Document ID: EDOC1100021785

Views: 47982

Downloads: 104

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next