No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9008 V5 Alarm Handling 05

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x100000B7 Soft-Start Circuit Undervoltage (Mainboard, Major Alarm)

ALM-0x100000B7 Soft-Start Circuit Undervoltage (Mainboard, Major Alarm)

Description

Alarm message:

Soft-start circuit voltage at arg1 detection point is undervoltage.

This alarm is generated when the voltage at the detection point arg1 of the soft-start circuit is lower than the minor threshold.

Alarm object: mainboard

Attribute

Alarm ID

Alarm Severity

Auto Clear

0x100000B7

Major

Yes

Parameters

Name

Meaning

arg1

Voltage detection point. For example, 12V, or a value from 12V_1 to 12V_5.

Impact on the System

The system may be powered off.

Possible Causes

The soft-start circuit on the mainboard is faulty.

Procedure

  1. Replace the mainboard. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 2.

  2. Getting Help.
Translation
Download
Updated: 2019-05-25

Document ID: EDOC1100023838

Views: 87336

Downloads: 16

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next