No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9008 V5 Alarm Handling 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x44000001 Logical Drive Degraded, Partially Degraded, or Offline (Logical Drive, Major Alarm)

ALM-0x44000001 Logical Drive Degraded, Partially Degraded, or Offline (Logical Drive, Major Alarm)

Description

Alarm message:

The logical drive arg1 under RAID card arg2 is arg3.

This alarm is generated when the logical drive of the RAID controller card is degraded, partially degraded, or offline.

Alarm object: Logical Drive

Attribute

Alarm ID

Alarm Severity

Auto Clear

0x44000001

Major

Yes

Parameters

Name

Meaning

arg1

ID of the logical drive, for example, 1 or 2.

arg2

Slot number and location of the RAID controller card, for example, 1 and PCIe Card 3 (RAID).

arg3

Local drive status, for example, degraded, partially degraded, or offline

Impact on the System

The fault of the RAID controller card degrades the RAID or causes data loss.

Possible Causes

Member drives of the RAID are removed.

Procedure

  1. Check whether the RAID array has member drives removed.

    • If no, go to step 2.
    • If no, go to step 3.

  2. Reinstall the hard disk and check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to step 3.

  3. Replace the hard disk that causes the RAID controller card failure, and then check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to step 4.

  4. Getting Help.
Translation
Download
Updated: 2019-05-25

Document ID: EDOC1100023838

Views: 108462

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next