No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9008 V5 Alarm Handling 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0800001F PCIe Card DIMM Fault (PCIe Card, Major Alarm)

ALM-0x0800001F PCIe Card DIMM Fault (PCIe Card, Major Alarm)

Description

Alarm message (iBMC versions earlier than 2.96):

The [arg1] PCIe card arg2 (arg3) arg4 is arg5.

Alarm message (iBMC 2.96 and later versions):

The [arg1] PCIe card arg2 (arg3) arg4 is arg5, arg6.

This alarm is generated when a DIMM fault is detected on the PCIe card.

Alarm object: PCIe card

Attribute

Alarm ID

Alarm Severity

Auto Clear

0x0800001F

Major

No

Parameters

Name

Meaning

arg1

Location of the PCIe card. For example, front or rear.

arg2

Slot number of the PCIe card, for example, 1 or 2.

arg3

Type of the PCIe card, for example, M60 GPU.

arg4

Silkscreen of the DIMM on the PCIe card. For example, DIMM00 or DIMM10.

arg5

Description of the DIMM fault. For example, not detected or isolated.

arg6

Error code of the alarm.

NOTE:

Only iBMC 2.96 and later support this parameter.

Impact on the System

The PCIe card cannot start, and services related to the PCIe card are affected.

Possible Causes

The PCIe card is faulty.

Procedure

  1. Check whether the DIMM is installed.

  2. Remove and reinstall the DIMM. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 4.

  3. Install a DIMM. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 4.

  4. Replace the PCIe card. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 2.

  5. Getting Help.
Translation
Download
Updated: 2019-05-25

Document ID: EDOC1100023838

Views: 102263

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next