No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9008 V5 Alarm Handling 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x10000033 Standby 5 V Undervoltage (Mainboard, Major Alarm)

ALM-0x10000033 Standby 5 V Undervoltage (Mainboard, Major Alarm)

Description

Alarm message:

Mainboard voltage (arg1 V) at standby 5 V detection point is lower than the undervoltage threshold (arg2 V). 

This alarm is generated when the voltage of the standby 5 V detection point on the mainboard is lower than the undervoltage major threshold.

Alarm object: mainboard

Attribute

Alarm ID

Alarm Severity

Auto Clear

0x10000033

Major

Yes

Parameters

Name

Meaning

arg1

Current reading of the sensor.

arg2

Alarm threshold.

Impact on the System

System stability is affected.

Possible Causes

The mainboard is faulty.

Procedure

  1. Replace the mainboard. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 2.

  2. Getting Help.
Translation
Download
Updated: 2019-05-25

Document ID: EDOC1100023838

Views: 101775

Downloads: 16

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next