No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9008 V5 Alarm Handling 05

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x1A000031 Insufficient NAND Flash Reserved Blocks (BMC, Major Alarm)

ALM-0x1A000031 Insufficient NAND Flash Reserved Blocks (BMC, Major Alarm)

Description

Alarm message:

The remaining reserved blocks of the NAND flash are less than arg1. 

This alarm is generated when the number of reserved blocks available for the NAND flash is less than the threshold.

BMC

NOTE:

Only iBMC 2.96 and later support this alarm.

Attribute

Alarm ID

Alarm Severity

Auto Clear

0x1A000031

Major

Yes

Parameters

Name

Meaning

arg1

Threshold of the number of reserved NAND flash blocks available, for example, 10.

Impact on the System

The board is affected.

Possible Causes

The number of reserved NAND flash blocks available is less than the threshold.

Procedure

  1. Replace the NAND flash. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 2.

  2. Getting Help.
Translation
Download
Updated: 2019-05-25

Document ID: EDOC1100023838

Views: 76020

Downloads: 16

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next