No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9008 V5 Alarm Handling 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0300000D Power Input Lost (PSU, Critical Alarm)

ALM-0x0300000D Power Input Lost (PSU, Critical Alarm)

Description

Alarm message:

The AC/DC input of PSU arg1 is lost or out-of-range. 

This alarm is generated when the power supply is interrupted while the power supply unit (PSU) is detected.

Alarm object: PSU

Attribute

Alarm ID

Alarm Severity

Auto Clear

0x0300000D

Critical

Yes

Parameters

Name

Meaning

arg1

Serial number of the PSU.

Impact on the System

The server powers off.

Possible Causes

  • Power cables are not connected.
  • A PSU is faulty.

Procedure

  1. Remove and reconnect the power cable. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 2.

  2. Replace the power cable. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 3.

  3. Replace the PSU. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 4.

  4. Getting Help.
Translation
Download
Updated: 2019-05-25

Document ID: EDOC1100023838

Views: 108839

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next