No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


KunLun 9008 V5 Alarm Handling 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-37000013 Incorrect PIC Connection

ALM-37000013 Incorrect PIC Connection


Alarm message:

Incorrect PIC connection


Alarm ID

Alarm Severity

Auto Clear







Alarm Severity

Indicates the alarm severity.

Alarm Source

Indicates the alarm source.


Indicates the event body for which an alarm is generated.


Indicates the time when an alarm is generated.


Provides an alarm description.

Event Code

Indicates the event code of an alarm.

Impact on the System

The physical partition may fail to power on.

Possible Causes

The PIC is incorrectly connected.


  1. Check whether the PIC is correctly connected.

  2. Remove and reconnect the PIC. Then check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 3.

  3. Check whether the PIC is connected to the correct ports.

    • Run the smmget -t fru -d productname command to obtain the product name.
    • For details about PIC connections between local partition management modules (LPMs) and central partition interconnect modules (CPIs), see the KunLun 9032 V100R001 User Guide.
    • If yes, go to Step 5.
    • If no, go to Step 4.

  4. Reconnect the PIC correctly. Then check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 5.

  5. Contact Huawei technical support.


After the fault is rectified, the system automatically clears the alarm.

Updated: 2019-05-25

Document ID: EDOC1100023838

Views: 108147

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next