No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9008 V5 Alarm Handling 04

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x08000017 Failed to Read PCIe Card Voltage (PCIe Card, Minor Alarm)

ALM-0x08000017 Failed to Read PCIe Card Voltage (PCIe Card, Minor Alarm)

Description

Alarm message:

Failed to obtain voltage of the arg4 detection point on the arg1 arg3 PCIe card arg2. 

This alarm is generated when the system failed to obtain the voltage of the PCIe card.

Alarm object: PCIe card

Attribute

Alarm ID

Alarm Severity

Auto Clear

0x08000017

Minor

No

Parameters

Name

Meaning

arg1

Location of the PCIe card. For example, front or rear.

arg2

Slot number of the PCIe card, for example, 1 or 2.

arg3

Type of the PCIe card, for example, M60 GPU.

arg4

Voltage detection point.

Example values:

  • 3V3, 0V95
  • VCC 5V0
  • NBS 1V8, NBS 0V9, AVS 0V9
  • DIMMA 0V6, DIMMB 0V6
  • FPGA 1V8, FPGA 1V2, FPGA 1V
  • DDR 1V2, DDR 2V5

Impact on the System

The voltage cannot be monitored. No alarm will be reported when the voltage is not in the normal range.

Possible Causes

  • The iBMC does not work normally.
  • The PCIe card is faulty.

Procedure

  1. Restart the iBMC. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 2.

  2. Remove and reinstall the power cable or board. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 2.

  3. Replace the PCIe card. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 4.

  4. Getting Help.
Translation
Download
Updated: 2019-01-08

Document ID: EDOC1100023838

Views: 74584

Downloads: 16

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next