No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


KunLun 9008 V5 Alarm Handling 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x2C000043 Inconsistent PBI Boards (System, Major Alarm)

ALM-0x2C000043 Inconsistent PBI Boards (System, Major Alarm)


Alarm message:

Different types of LPM boards are used.

This alarm is generated when LPMs of different models are installed in the same server.

Alarm object: system


Alarm ID

Alarm Severity

Auto Clear







Impact on the System

The system may fail to power on.

Possible Causes

  • The LPMs installed in the server are of different models.


  1. Power off the server, and remove the power cables from the server.
  2. Check whether the models of the two LPMs are the same.

  3. Replace the improper LPM. Then power on the server and check whether the alarm is cleared.

    For details about how to replace an LPM, see the user guide of the server you use.

    • If yes, no further action is required.
    • If no, go to Step 4.

  4. Getting Help.
Updated: 2019-05-25

Document ID: EDOC1100023838

Views: 107510

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next