No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9008 V5 Alarm Handling 05

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0300001F Power Failure (PSU, Major Alarm)

ALM-0x0300001F Power Failure (PSU, Major Alarm)

Description

Alarm message:

Server power failure occurred at arg1. The power has been already restored.

This alarm is generated to report a power failure occurred on a server. The power has been already restored.

Alarm object: PSU

Attribute

Alarm ID

Alarm Severity

Auto Clear

0x0300001F

Major

No

Parameters

Name

Meaning

arg1

Time when the power failure occurred.

Format: YYYY-MM-DD HH:MM:SS

Impact on the System

There is no power supply to the server.

Possible Causes

The mains supply is abnormal.

Procedure

  1. Check the power supply in the equipment room and remove and reconnect the power cable to the server. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 2.

  2. Getting Help.
Translation
Download
Updated: 2019-05-25

Document ID: EDOC1100023838

Views: 76115

Downloads: 16

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next