No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9008 V5 Alarm Handling 05

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0800001B PCIe Card Hardware Fault (PCIe Card, Major Alarm)

ALM-0x0800001B PCIe Card Hardware Fault (PCIe Card, Major Alarm)

Description

Alarm message:

A hardware fault (arg1) occurs in [arg2] PCIe card arg3 (arg4).

This alarm is generated when a hardware fault is detected on the PCIe card.

Alarm object: PCIe card

Attribute

Alarm ID

Alarm Severity

Auto Clear

0x0800001B

Major

No

Parameters

Name

Meaning

arg1

Description of the hardware fault. For example, system power loss or core clock signal loss.

arg2

Location of the PCIe card. For example, front or rear.

arg3

Slot number of the PCIe card, for example, 1 or 2.

arg4

Type of the PCIe card, for example, M60 GPU.

Impact on the System

The PCIe card cannot work normally.

Possible Causes

  • The system power signal is lost.
  • The core clock signal is lost.
  • The port clock signal is lost.

Procedure

  1. Replace the PCIe card. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 2.

  2. Getting Help.
Translation
Download
Updated: 2019-05-25

Document ID: EDOC1100023838

Views: 75914

Downloads: 16

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next