No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9008 V5 Alarm Handling 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-37000045 Incorrect Physical Partition Mode

ALM-37000045 Incorrect Physical Partition Mode

Description

Alarm message:

The system product model is incompatible with the current physical partition mode.
NOTE:

This alarm is generated when the system physical partition mode does not match the product model.

Attribute

Alarm ID

Alarm Severity

Auto Clear

37000045

Major

Yes

Parameters

Name

Meaning

Alarm Severity

Indicates the alarm severity.

Alarm Source

Indicates the alarm source.

Subject

Indicates the event body for which an alarm is generated.

Time

Indicates the time when an alarm is generated.

Description

Provides an alarm description.

Event Code

Indicates the event code of an alarm.

Impact on the System

  • Some physical partitions are unavailable.

Possible Causes

  • The product model is switched, but the hardware partition mode is not switched accordingly.

Procedure

  1. Log in to the CMC WebUI as an administrator, click Switch Physical Partition Mode on the KPAR page, and check whether the operation is successful.

    • If yes, no further action is required.
    • If no, go to Step 2.

  2. Make sure that the conditions for physical partition mode switching are met based on the displayed message, log in to the CMC WebUI again to switch the physical partition model, and check whether the physical partition model is switched successfully.

    • If yes, no further action is required.
    • If no, go to Step 3.

  3. Contact Huawei technical support.

Clearing

After the fault is rectified, the system automatically clears the alarm.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1100023838

Views: 108543

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next