No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

2488 V5 Server V100R005 LCD User Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Function Description

Function Description

Functions

An LCD displays the installation status and running status of server components and enables users to set the IP address of the iBMC management network port on the server.

The LCD and the server iBMC management module (iBMC for short) form an LCD subsystem. The LCD directly obtains device information from the iBMC. The LCD subsystem does not store device data, but allows users to query device status and alarms.

Figure 1-1 shows the working principle of the LCD subsystem.

Figure 1-1 Working principle

Installation Position

The LCD is installed on the top right side of the front server panel, as shown in Figure 1-2.

Figure 1-2 Installation position

LCD Screen

Figure 1-3 shows the LCD screen.

Figure 1-3 LCD screen

Table 1-1describes the functions of each tab on the LCD screen.

Table 1-1 Tab function

Tab Name

Function

Status

Displays the port 80 status, serial number, component status, and component alarms of the server.

Monitor

Displays the current power of the server, CPU temperature, and inlet temperature.

Info.

Displays the IP address and MAC address of the iBMC management network port, MAC addresses of host network LOM ports, device serial numbers, asset information, and firmware version.

Setting

Sets the IP address of the iBMC management network port.

Icon Description

Table 1-2describes the LCD subsystem icons and their meanings.

Table 1-2 Icon meaning

Icon

Description

Indicates that the server is operating properly and that no alarms have been generated.

Indicates that a minor alarm has been generated.

A minor alarm indicates a fault that does not have major impact on the system. This alarm requires prompt corrective measures to prevent more serious faults.

Indicates that a major alarm has been generated.

A major alarm indicates a fault that may affect normal running of the system or interrupt services. This alarm requires prompt corrective measures to prevent more serious faults.

Indicates that a critical alarm has been generated.

A critical alarm indicates a fault that may power off a device or even interrupt system services. This alarm requires immediate corrective measures.

Indicates that the component cannot be scanned.

Indicates that the component is operating properly.

Indicates that a minor alarm has been generated on the component.

Indicates that a major alarm has been generated on the component.

Indicates that a critical alarm has been generated on the component.

Indicates that the component is not installed.

Page down

Back

Page up

Indicates the delete key on the soft keyboard.

Translation
Download
Updated: 2018-07-24

Document ID: EDOC1100024625

Views: 1961

Downloads: 8

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next