No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

2488 V5 Server V100R005 LCD User Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Server Information

Viewing Server Information

Entering the Info. tab

  1. On the LCD screen, tap the Info. tab.

    The Info. tab is displayed, as shown in Figure 6-1.

    Figure 6-1 Info. tab

    Mgmt Port

    Displays the IP information of the management network port.

    Basic Info

    Displays the MAC addresses of host network ports, device serial numbers, and asset information.

    Version

    Displays firmware version information.

Viewing the IP address of the management network port

  1. Tap the Mgmt Port tab.

    The Mgmt Port tab is displayed, as shown in Figure 6-1.

  2. View the IP address of the management network port.

    The Mgmt Port tab displays the mode, VLAN ID, MAC address, IPv4 address, and IPv6 address of the management network port.

Viewing basic information

  1. Tap the Basic Info tab.

    The Basic Info tab is displayed, as shown in Figure 6-2.

    Figure 6-2 Basic Info tab

  2. View the MAC addresses of host network ports, device serial numbers, and asset information.

Viewing firmware versions

  1. Tap the Version tab.

    The Version tab is displayed, as shown in Figure 6-3.

    Figure 6-3 Version tab

  2. View the firmware version.

    The Version tab displays the following firmware:

    • iBMC: indicates the iBMC system.
    • BIOS: indicates the basic input/output system (BIOS).
    • CPLD: indicates the complex programmable logical device (CPLD).
    • LCD: indicates the LCD.
    • HDD BP: indicates the hard disk backplane.
    • NIC Card: indicates the NIC.
    • MainBoard : indicates the mainboard.

Translation
Download
Updated: 2018-07-24

Document ID: EDOC1100024625

Views: 1993

Downloads: 9

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next