No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

2488 V5 Server V100R005 LCD User Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the IP Address for the Management Network Port and the Switching

Setting the IP Address for the Management Network Port and the Switching

You must set the IP address for the management network port on the server.

This IP address can be a dynamic or static IP address.

  • The dynamic IP address is controlled by Dynamic Host Configuration Protocol (DHCP). After the DHCP function is enabled, the IP address of the management network port is obtained automatically.
  • The static IP address is set manually.

Table 7-1lists the data to be obtained.

Table 7-1 Data to be obtained

Category

Parameter

Description

Example Value

IP address information of the management network port

IPv4

DHCP

Specifies whether to enable the DHCP function.

NOTE:

You can set a static IP address for the management network port only after the DHCP function is disabled.

Value: ON or OFF

  • means DHCP function is enabled.
  • means DHCP function is disabled.

Setting method:

  • Tap to enable the DHCP function.
  • Tap to disable the DHCP function.

OFF

IP Addr

Specifies the static IPv4 address of the management network port.

Value: The IPv4 address is expressed in decimal format. The maximum length is 32 digits.

Value rule:

  • The value is divided into four sets. Each set has three decimal numbers.
  • Each set is separated by period (.).
  • The value of each set ranges from 0 to 255.

Setting method: Use the soft keyboard.

192.168.30.126

Subnet Mask

Specifies the subnet mask of the management network port.

Setting method: Use the soft keyboard.

255.255.255.0

Default GatWay

Specifies the gateway address of the management network port.

Setting method: Use the soft keyboard.

192.168.30.1

IPv6

DHCP

Specifies whether to enable the DHCP function.

NOTE:

You can set a static IP address for the management network port only after the DHCP function is disabled.

Value: ON or OFF

  • means DHCP function is enabled.
  • means DHCP function is disabled.

Setting method:

  • Tap to enable the DHCP function.
  • Tap to disable the DHCP function.

OFF

IP Addr

Specifies the static IPv6 address of the management network port.

Value: The IPv6 address is expressed in hexadecimal format. The maximum length is 128 characters.

Value rule:

  • The value is divided into eight sets. Each set has four hexadecimal numbers.
  • Each set is separated by colon (:).
  • The value of each set ranges from 0 to 9 or a to f.

Setting method: Use the soft keyboard.

2001::1:174

Prefix Length

Specifies the type of IPv6 address.

The default value is 64, indicating the subnet in the Local Area Network (LAN).

Setting method: Use the soft keyboard.

64

Default GateWay

Specifies the gateway address of the management network port.

Setting method: Use the soft keyboard.

::

Procedure

Switch to the Setting tab.

  1. On the LCD, tap the Setting tab.

    The Setting tab is displayed, as shown in Figure 7-1.

    Figure 7-1 Setting tab

Set the IP address.

  1. Tap the Mgmt Port tab.

    The Mgmt Port tab is displayed, as shown in Figure 7-1.

  2. Set the IP address of the management network port based on the parameter information described in Table 7-1.

    NOTE:

    The soft keyboard is displayed when you tap the text box. Use the software keyboard to set IP address information or tap Cancel to return to the Mgmt Port tab.

Translation
Download
Updated: 2018-07-24

Document ID: EDOC1100024625

Views: 1968

Downloads: 9

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next