No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionCloud 6.3.0 Solution Description 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Related Services

Related Services

In the Region Type I scenario, Figure 36-4 shows the relationships between vAPP and other cloud services. Table 36-2 describes the details.

In the Region Type II scenario, Figure 36-4 shows the relationships between vAPP and other cloud services. Table 36-2 describes the details.

Figure 36-4 vAPP-related services

In the Region Type III scenario, Figure 36-5 shows the relationships between vAPP and other cloud services. Table 36-2 describes the details.

Figure 36-5 vAPP-related services

Table 36-2 Relationships between vAPP and other cloud services

Cloud Service Name

Description

ECS

The vAPP service uses the ECS service to directly create ECSs, and manage and maintain the created ECSs.

BMS

The vAPP service uses the BMS service to directly create BMSs, and manage and maintain the created BMSs.

EIP

If an ECS needs to use an existing EIP, you need to use the EIP service to create an EIP first.

VPC

The VPC service provides subnets and security groups for the vAPP service to create ECSs or BMSs.

ELB

If an ELB is required when you create an ECS or a BMS using the vAPP service, you need to use the ELB service to create an ELB first.

AS

After an ELB is configured, AS automatically adds or removes an ECS in the ELB.

AS

After AS policies are configured, the system automatically adds ECSs during traffic peaks and releases ECSs during traffic lulls, meeting your service requirements and maximizing resource utilization.

EVS

The vAPP service uses the EVS service to directly create EVS disks for ECSs or BMSs, and manage and maintain the created EVS disks.

IMS

If an image is required when you create an ECS or a BMS using the vAPP service, you need to use the IMS service to create an image first. If scripts in the vAPP service need to obtain software from images and install the software on ECSs or BMSs, software must be installed in the images.

Translation
Download
Updated: 2019-04-23

Document ID: EDOC1100026685

Views: 152853

Downloads: 262

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next