No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionAccess V100R006C20 on FusionCloud 6.3.x Software Installation Guide 11 (LiteAD)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Defining a Linux Infrastructure ECS

Defining a Linux Infrastructure ECS


This section describes how to create and publish a Linux infrastructure ECS on the ManageOne operation plane.


You have obtained the address and operation administrator's username and password for logging in to the ManageOne operation plane.


  1. Use a browser to log in to the ManageOne operation plane as an operation administrator.

    • FusionCloud 6.3.0:

      Login address: https://address for accessing the console home page.

    • FusionCloud 6.3.1 or later:
      • URL in the non-B2B scenario: https://Address for accessing the ManageOne Console page. For example,

        URL in the B2B scenario: https://Address used by operation administrators to access ManageOne. For example,

      • The username and password of the default operation administrator are bss_admin and Changeme_123, respectively. If this is your first login to the system, you need to change the password. If this is not your first login to the system, obtain the new password.

    If you log in to the ManageOne operation plane as an agent administrator, switch to the tenant to be managed first.

  2. Select a region and a project from the drop-down box in the upper left corner of the page.
  3. Choose Product > Product Management.
  4. Choose Computing > Elastic Cloud Server.
  5. Click Create Product. The page for creating a product is displayed.
  6. Set the parameters according to Table 4-10. Retain the default values for the parameters that are not involved.

    Table 4-10 Parameters required for creating a product




    Basic Information

    Product Name

    Set this parameter to Linux Infrastructure ECS.

    Service Type

    The value is fixed to ecs.


    Select No.

    Parameter Configuration


    Select Fixed.


    Select the AZ as required.


    Select User-defined. That is, enter the value when a user applies for a product.


    Select Fixed.

    Image Type

    Select Public Image.


    Select the image created in Creating a Linux VM Image.

  7. Click Create Now, Submit, or OK.

    The system returns to the product page. If the new product is displayed, the product is created successfully.

  8. In the area where the target product is located, click .

    If the version is FusionCloud 6.3.1 or later, click Publish.

    In the list view, locate the row that contains the product to be released, and click Publish.

  9. In the Set Publishing dialog box that is displayed, select the visible scope and set the approval.
  10. Click OK.
  11. On the displayed page, locate the area that contains the target product, and click .

    If the version is FusionCloud 6.3.1 or later, click Bring Online.

    In the list view, locate the row that contains the product to be published and choose More > Bring Online.

  12. In the displayed Set online dialog box, set related parameters.
  13. Click OK.
Updated: 2019-07-01

Document ID: EDOC1100026752

Views: 29093

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next