No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess V100R006C20 on FusionCloud 6.3.x Software Installation Guide 11 (LiteAD)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Time

Configuring Time

Scenarios

This section describes how to configure the time zone and time synchronization on FusionAccess cascaded on the ITA component.

Prerequisites

You have logged in to the current tenant's FusionAccess management system.

Procedure

Configuring the FusionAccess time zone

  1. On the FusionAccess page of the current tenant, choose System > Time Management > Time Zone.

    The Time Zone page is displayed.

  2. Configure the time zone.
  3. Determine whether to select Support DST based on site requirements and set DST rules.
  4. Click OK.

Configuring FusionAccess time synchronization

  1. On the FusionAccess page of the current tenant, choose System > Time Management > Time Synchronization.

    The Time Synchronization page is displayed.

  2. In the Upper-layer clock source area, configure the clock source IP address or domain name.
  3. Click to configure another clock source IP address or domain name.
  4. Click OK.
Translation
Download
Updated: 2019-07-01

Document ID: EDOC1100026752

Views: 29397

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next