No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess V100R006C20 on FusionCloud 6.3.x Software Installation Guide 11 (LiteAD)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to a Desktop Using a Mac PC

Logging In to a Desktop Using a Mac PC

Scenarios

If domain authentication is used for user login, you can log in to your VM using a Mac PC.

NOTE:

Clients can be Mac PCs running on the 10.9 or later OS.

Prerequisites

The installation package of the Mac Software Client is available.

Data

Key data and parameters required for this task are described in the specific procedures.

Software

Table 7-2 lists the required software.

Table 7-2 Software

Type

Name

Description

Mac Software Client

Client_for_mac_v1.6.xxxxx.dmg

Path to obtain the package:

For enterprise users, click here.

For carrier users, click here.

Download Client_for_mac_v1.6.xxxxx.zip and decompress it.

Procedure

Install the Mac Software Client.

  1. Copy Client_for_mac_v1.6.xxxxx.dmg to a folder on the Mac PC, for example, Desktop.
  2. Double-click the installation package.

    The fusionaccess_mac window is displayed.

  3. Double-click Install.mpkg.
  4. Click Continue.
  5. Click Install.

    If you want to change the installation location, click Change Install location.

  6. In the window that is displayed, enter the username and the password and click Install Software.

    The installation process takes about 1 minute.

  7. Click Close.

    The Mac Software Client is installed.

Select a login mode.

  1. Determine the login mode.

    • To log in from a cloud client, go to Step 9.
    • To log in from a Mac browser, go to Step 13.

Log in from a cloud client.

  1. In the application program, double-click FusionAccess.app.

    The FusionAccess window is displayed.

  2. Enter the cloud server IP address and click.

    NOTE:

    The cloud server IP address is the FQDN or service plane IP address of the WI server. For FQDN, you need to configure the DNS server address.

    For example, the address is https://cloud.huawei.com or 192.168.131.61.

    The WI login interface is displayed.

  3. Type the username and the password and press Enter.
  4. In the VM list, click the icon of a VM to log in to the virtual desktop.

Log in from a Mac browser.

  1. Open the browser on the Mac OS, enter the cloud server address in the address box, and press Enter.

    NOTE:
    • Ensure that the local IP address of the Mac PC is interconnected with the plane of the cloud server.
    • The cloud server IP address is the FQDN or service plane IP address of the WI server. For FQDN, you need to configure the DNS server address.

    For example, the address is https://cloud.huawei.com or 192.168.131.61.

  2. Type the username and the password and press Enter.
  3. In the VM list, click the icon of a VM to log in to the virtual desktop.
Translation
Download
Updated: 2019-07-01

Document ID: EDOC1100026752

Views: 29414

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next