No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
FusionCloud 6.3.0 Software Installation Guide 05
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Overview

This document describes how to install FusionCloud 6.3.0 using FusionCloud Deploy.

Intended Audience

This document is intended for:

  • Software installation engineers
  • System maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

05

2018-10-15

This issue is the fifth official release.

04

2018-08-30

This issue is the fourth official release.

03

2018-07-30

This issue is the third official release.

02

2018-07-10

This issue is the second official release.

  • In Installation Guide, section "Synchronizing the CA Certificate of the Production Center to the DR Center" is added to the process of installing CSDR by using FusionCloud Deploy.
  • In the process of adding a CSBS/VBS by Adding Advanced Cloud Services in the CSHA scenario, the operation of Modifying Configuration Files is added before the operation of using FusionCloud Deploy to complete deployment.
  • In the process of adding a CSBS/VBS by Adding Advanced Cloud Services in the CSHA scenario, the operation of Post-installation Configuration is added after the operation of using FusionCloud Deploy to complete deployment.

01

2018-06-30

This issue is the first official release.

Translation
Download
Updated: 2018-10-16

Document ID: EDOC1100026807

Views: 53303

Downloads: 170

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next