Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Accessible IP Address/Address Segment for a CIFS Share
This operation allows you to modify the IP addresses or IP address segments that can access a CIFS Homedir share.
Procedure
- Log in to DeviceManager.
- Choose
Provisioning >
Share > CIFS Homedir.
- From the CIFS share list, select the CIFS Homedir share whose IP address or IP address segment you want to modify.
- Add accessible IP addresses or IP address segments.
- On the Accessible IP Address/Address Segment tab page, click Add.
The Add IP Address or IP Address Segment dialog box is displayed.
- In IP Address/Address Segment, specify the IP addresses or IP address segments that you want to add.
- An IP address segment is in the format of IP address/mask, for example, 192.168.1.100/16. A mixed IP address segment (IPv4 and IPv6) is not supported. The mask of IPv4 ranges from 1 to 32, and the mask of IPv6 ranges from 1 to 128.
- The value of IP Address/Address Segment can be a single IPv4 or IPv6 address, for example, 192.168.1.100, or an IP address segment, for example, 192.168.1.100/16 or 192.168.1.10 to 192.168.1.11/30.
- A maximum of 32 IP addresses or IP address segments can be added.
- Click OK.
The Success dialog box is displayed, indicating that the accessible IP addresses or IP address segments are added successfully.
- Click OK.
You can view added IP addresses or IP address segments in the Accessible IP Address/Address Segment list.
- On the Accessible IP Address/Address Segment tab page, click Add.
- Modify an IP address or IP address segment.
- In Accessible IP Address/Address Segment, select the IP address or IP address segment that you want to remove and click Properties.
The Properties of Accessible IP Address/IP Address Segment dialog box is displayed.
- In IP Address/Address Segment, specify the IP addresses or IP address segments that you want to add.
- An IP address segment is in the format of IP address/mask, for example, 192.168.1.100/16. A mixed IP address segment (IPv4 and IPv6) is not supported. The mask of IPv4 ranges from 1 to 32, and the mask of IPv6 ranges from 1 to 128.
- The value of IP Address/Address Segment can be a single IPv4 or IPv6 address, for example, 192.168.1.100, or an IP address segment, for example, 192.168.1.100/16 or 192.168.1.10 to 192.168.1.11/30.
- A maximum of 32 IP addresses or IP address segments can be added.
- Click OK.
The Success dialog box is displayed.
- Click OK.
- In Accessible IP Address/Address Segment, select the IP address or IP address segment that you want to remove and click Properties.
- Remove an IP address or IP address segment.
- In Accessible IP Address/Address Segment, select the IP address or IP address segment that you want to remove and click Remove.
The security alert dialog box is displayed.
- Confirm the information in the dialog box, select I have read and understand the consequences associated with performing this operation, and click OK.
The Execution Result dialog box is displayed.
- Click Close.
- In Accessible IP Address/Address Segment, select the IP address or IP address segment that you want to remove and click Remove.
Provisioning > 
Share > CIFS Homedir.
