Modifying the IP Address/Address Segment for a CIFS Share

Procedure

1. Log in to DeviceManager.
2. Choose Provisioning > Share > CIFS (Windows/MAC).
3. From the CIFS share list, select the CIFS share whose IP address or IP address segment you want to modify.
4. Add accessible IP addresses or IP address segments.
   1. On the Accessible IP Address/Address Segment tab page, click Add.

      The Add IP Address or IP Address Segment dialog box is displayed.

   2. In IP Address/Address Segment, specify the IP addresses or IP address segments that you want to add.
      • An IP address segment is in the format of IP address/mask, for example, 192.168.1.100/16. The IPv4 mask ranges from 1 to 32, and the IPv6 mask ranges from 1 to 128. Mixed IP address segments (IPv4 and IPv6) are not supported.
      • The value of IP Address/Address Segment can be a single IPv4 or IPv6 address, for example, 192.168.1.100, or an IP address segment, for example, 192.168.1.100/16 or 192.168.1.10 to 192.168.1.11/30.
      • You can enter a maximum of 32 IP addresses or IP address segments.
   3. Click OK.

      The Success dialog box is displayed, indicating that the accessible IP addresses or IP address segments are added successfully.

   4. Click OK.

      You can view added IP addresses or IP address segments in the Accessible IP Address/Address Segment list.

5. Modify an IP address or IP address segment.
   1. In Accessible IP Address/Address Segment, select the IP address or IP address segment that you want to remove and click Properties.

      The Properties of Accessible IP Address/IP Address Segment dialog box is displayed.

   2. In IP Address/Address Segment, enter new IP addresses or IP address segments.
      • An IP address segment is in the format of IP address/mask, for example, 192.168.1.100/16. The IPv4 mask ranges from 1 to 32, and the IPv6 mask ranges from 1 to 128. Mixed IP address segments (IPv4 and IPv6) are not supported.
      • The value of IP Address/Address Segment can be a single IPv4 or IPv6 address, for example, 192.168.1.100, or an IP address segment, for example, 192.168.1.100/16 or 192.168.1.10 to 192.168.1.11/30.
      • You can enter a maximum of 32 IP addresses or IP address segments.
   3. Click OK.

      The Success dialog box is displayed.

   4. Click OK.

6. Remove an IP address or IP address segment.
   1. In Accessible IP Address/Address Segment, select the IP address or IP address segment that you want to remove and click Remove.

      The security alert dialog box is displayed.

   2. Carefully read the content of the dialog box, select I have read and understand the consequences associated with performing this operation, and click OK.

      The Execution Result dialog box is displayed.

   3. Click Close.