No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Feature Description - VPN 01

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Interface-based Hard Pipe Bandwidth Reservation

Interface-based Hard Pipe Bandwidth Reservation

During network planning, traffic is classified as hard pipe traffic and soft pipe traffic based on interfaces. Hard pipe traffic must have low delay and no packet loss and not be affected by soft pipe traffic. Therefore, fixed bandwidth must be allocated to hard pipe traffic on interfaces. This bandwidth is exclusive to hard pipe traffic.

On devices, hard pipe and soft pipe services on interfaces are assigned forwarding paths with different priorities. When both hard and soft pipes have traffic, the hard pipe traffic is preferentially forwarded, guaranteeing low delay. The maximum bandwidth is also configured for the forwarding paths to ensure that the sum of hard and soft pipe bandwidth does not exceeds the interface bandwidth. Subsequently, the hard and soft pipe services do not affect each other.

On the network shown in Figure 9-5, bandwidth limitation is applied to the hard pipe VI and soft pipe VI. The hard pipe VI traffic is preferentially scheduled on the physical interface, ensuring guaranteed bandwidth and low delay.
Figure 9-5  Hard and soft pipe bandwidth reservation

End-to-end hard pipe service deployment can be implemented only through the NMS. The NMS delivers hard pipe VLL/PWE3 or TE LSP configurations based on the bearer capabilities of the hard pipe. The device establishes VLL/PWE3 PWs and TE LSPs based on the delivered data and transmits VLL/PWE3 or TE services through the hard pipe.

The NMS supports alarm thresholds for services exceeding the hard pipe's processing capabilities, ensuring that services transmitted over the hard pipe do not exceed the hard pipe's processing capabilities.

Download
Updated: 2018-07-04

Document ID: EDOC1100027166

Views: 42855

Downloads: 166

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next