No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Feature Description - VPN 01

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Hard-Pipe-based Enterprise Leased Line Application

Hard-Pipe-based Enterprise Leased Line Application

The carrier plans the logical hard network on the existing IP bearer network and reserves the hard pipe bandwidth on physical interfaces.

On the network shown in Figure 9-7, an enterprise user wants to establish a leased line between two sites over a carrier's network. The carrier first plans a path and then establishes a static bidirectional LSP dedicated to the hard pipe over the path. The PEs then establish a hard-pipe-based static PW. Bandwidth is reserved hop by hop along the path. If Ethernet links that share bandwidth are used for user access, configure QoS on AC interfaces to limit the access bandwidth. Subsequently, a hard-pipe-based enterprise leased line is established. If the hard pipe bandwidth is inadequate, the NMS does not allow the static PW to be established.

Figure 9-7  Hard-pipe-based enterprise leased line application

Download
Updated: 2018-07-04

Document ID: EDOC1100027166

Views: 47534

Downloads: 185

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next