No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Feature Description - WAN Access 01

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for HDLC and IP-Trunk

Application Scenarios for HDLC and IP-Trunk

HDLC

Figure 3-3  HDLC

On the network shown in Figure 3-3, a point-to-point link is established betweenDevice A and Device B, and HDLC is configured on Device A and Device B. HDLC provides simple, stable, and reliable data transmission and features high fault tolerance at the data link layer.

IP-Trunk

For an IP-Trunk interface, you can configure weights for member interfaces to implement load balancing among member interfaces. There are two load balancing modes, namely, per-destination and per-packet load balancing.

  • Per-destination load balancing: packets with the same source and destination IP addresses are transmitted over one member link.

  • Per-packet load balancing: packets are transmitted over different member links.

As shown in Figure 3-4, two routers are connected through POS interfaces that are bundled into an IP-Trunk interface to transmit IPv4, IPv6, and MPLS packets.

Figure 3-4  IP-Trunk networking
Download
Updated: 2018-07-04

Document ID: EDOC1100027168

Views: 12067

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next