No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Feature Description - WAN Access 01

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PPP Flapping Suppression

PPP Flapping Suppression

Background

Due to unstable signals on physical links or incorrect configurations at the data link layer on live networks, PPP-capable interfaces may frequently experience PPP negotiation, and the PPP protocol status of these interfaces may alternate between Up and Down, causing routing protocol or MPLS flapping. As a result, devices and networks are severely affected. Worse still, devices are paralyzed and the network become unavailable.

PPP flapping suppression restricts the frequency at which the PPP protocol status of an interface alternates between Up and Down. This restriction minimizes the impact of flapping on devices and networks.

Implementation Principles

PPP flapping suppression involves the following concepts:

  • Penalty value: This value is calculated based on the PPP protocol status of the interface using the suppression algorithm. The core of the suppression algorithm is that the penalty value increases with the changing times of the interface status and decreases exponentially.
  • Suppression threshold: The PPP protocol status of an interface is suppressed and remains Down when the penalty value is greater than the suppression threshold.
  • Reuse threshold: The PPP protocol status of an interface is no longer suppressed when the penalty value is smaller than the reuse threshold.
  • Ceiling threshold: The penalty value no longer increases when the penalty value reaches the ceiling threshold, preventing the PPP protocol status of an interface from being suppressed for a long time. The ceiling value can be calculated using the following formula: ceiling = reuse x 2(MaxSuppressTime/HalfLifeTime).
  • Half-life-period: period that the penalty value takes to decrease to half. A half-life-period begins to elapse when the PPP protocol status of an interface goes Down for the first time. If a half-life-period elapses, the penalty value decreases to half, and another half-life-period begins.
  • Max-suppress-time: maximum period during which the PPP protocol status of an interface is suppressed. After a max-suppress-time elapses, the PPP protocol status of the interface is renegotiated and reported.

Figure 4-9 shows the relationships between these parameters.

Figure 4-9  PPP flapping suppression

At t1, the PPP protocol status of an interface goes Down, and its penalty value increases by 1000. Then, the interface goes Up, and its penalty value decreases exponentially based on the half-life rule. At t2, the PPP protocol status of the interface goes Down again, and its penalty value increases by 1000, reaching 1600, which has exceeded the suppression threshold of 1500. The PPP protocol status of the interface is therefore suppressed. As the interface keeps flapping, its penalty value keeps increasing until it reaches the ceiling threshold of 10000 at tA. As time goes by, the penalty value decreases and reaches the reuse value of 750 at tB. The PPP protocol status of the interface is then no longer suppressed.

Download
Updated: 2018-07-04

Document ID: EDOC1100027168

Views: 12344

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next