No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C00 Feature Description - WAN Access 01

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MP Applications

MP Applications

A single PPP link can provide only limited bandwidth. To increase link bandwidth and reliability, bundle multiple PPP links into a MP link.

As shown in Figure 4-10, there are two PPP links between Device A and Device B. The two PPP links are bundled into an MP link by creating an MP-group interface. The MP link provides higher bandwidth than a single PPP link. If one PPP link in the MP group fails, communication over the other PPP link is not affected.

Figure 4-10  Communication over an MP link

Updated: 2018-07-04

Document ID: EDOC1100027168

Views: 12153

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next