No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage V100R006C30 File Storage Service Software Installation Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installation Process

Installation Process

This chapter introduces the software installation process, helping you know the key installation tasks and procedures.

Table 2-1 shows the software installation process.

Table 2-1  Software installation process

No.

Operation

Description

Time Required

1

Prepare for installation.

Obtaining software packages and documents

Obtain the required software packages and reference documents.

Perform this operation two days before installation.

Preparing the installation tool

Prepare software and hardware tools required during the installation.

Checking the PC for the installation

Check whether the PC for the installation meets the requirements.

Checking storage nodes

Check whether the storage nodes meet the requirements.

2

Configure switches.

Configuring switches on a 10GE network

Provide three types of switch configurations: separate front-end and back-end switches, shared front- and back-end switches, and multi-cluster shared switches. You can configure switches based on site requirements to implement network communication between internal devices.

20 minutes

Configuring switches on an IB network

Describe how to configure switches on the back-end network and management network to ensure normal communication among all internal devices.

3

Build an installation environment.

Describe how to ensure normal communication between storage nodes and the PC for the installation.

10 minutes

4

Install storage cluster software.

Install storage cluster software using Operation & Maintenance Tool.

Estimated time: When the number of storage nodes is smaller than 20, the estimated time is 10 min. An additional 20 minutes is required for each 10-node increment.

5

Apply for and import a license.

For the follow-up basic service configuration, you need to import a standard license.

10 minutes

Download
Updated: 2019-04-08

Document ID: EDOC1100027975

Views: 3886

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next