No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage V100R006C30 Block Storage Service Troubleshooting Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
The OpenSM Process Is Abnormal

The OpenSM Process Is Abnormal

Symptom

This alarm is generated when the OpenSM process is abnormal or when the FusionStorage Agent (FSA) software is reinstalled for the node that has the OpenSM process deployed.

Possible Causes

  • The FAS software is reinstalled for the OpenSM-deployed node.
  • The operating system (OS) is faulty.

Fault Diagnosis

None

Procedure

    1. Use PuTTY to log in to the FusionStorage Manager (FSM) node.

      Ensure that the floating IP address of the management plane and username dsware are used to establish the connection.

      The default password of user dsware is IaaS@OS-CLOUD9!.

      If the public and private keys are used to authenticate the login, perform the operations based on Using PuTTY to Log In to a Node in Key Pair Authentication Mode in the FusionStorage Block Storage Service Administrator Guide.

    2. Run the following command to switch to the specified directory:

      cd /opt/dsware/client/bin

    3. Run the following commands to deploy and start the OpenSM process:

      NOTE:

      Since the system has been hardened, you need to enter the username and password for login authentication after running the dswareTool command of FusionStorage Block. The default username is cmdadmin, and its default password is IaaS@PORTAL-CLOUD9!.

      The system supports authentication using environment variables so that you do not need to repeatedly enter the username and password for authentication each time you run the dswareTool command. For details, see Authentication Using Environment Variables in the FusionStorage Block Storage Service Software Installation Guide.

      sh dswareTool.sh --op startupOpenSM -ip Management IP address of the OpenSM-deployed node -num Number of processes -ports InfiniBand network port

      In this command, num specifies the number of processes to be started, and ports specifies the ports on which the process runs. The number of processes is the same as the number of ports. The num and ports parameter values must be the same as they were before the fault occurred.

      Example:

      sh dswareTool.sh --op startupOpenSM -ip 192.168.40.101 -num 1 -ports ib0

      or

      sh dswareTool.sh --op startupOpenSM -ip 192.168.40.101 -num 2 -ports ib0,ib1

Related Information

None

Translation
Download
Updated: 2019-09-09

Document ID: EDOC1100027999

Views: 5664

Downloads: 17

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next