No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the TTL and EXP Processing Mode When the Explicit Null Label Is Used

(Optional) Configuring the TTL and EXP Processing Mode When the Explicit Null Label Is Used

This section describes how to configure the TTL and EXP processing mode when the explicit null label is used.

Background Information

If the explicit null label and the uniform mode are configured, an egress PE copies the TTL and EXP values to the IP or inner packets before forwarding them out of a public network. If the explicit null label and the pipe mode are configured, an egress PE does not copy the TTL or EXP values to the IP or inner packets.

Prerequisites

Completing the following tasks:

  • Configure the MPLS functions.

  • Configure the egress PE to assign the explicit null label upstream.

Precautions

The configuration takes effect only on the egress PE.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    mpls

    The MPLS view is displayed.

  3. Run:

    label advertise explicit-null

    The egress PE is enabled to assign the explicit null label upstream.

  4. Run:

    explicit-null-label ttl-mode { uniform | pipe }

    The mode used by the egress PE to process TTL values is configured.

    Either of the following modes can be used:

    • uniform: The egress PE copies the TTL value in an MPLS packet to the TTL field in the IP or inner packet.
    • pipe: The egress PE does not copy the TTL value in an MPLS packet to the TTL field in the IP or inner packet.

  5. Run:

    explicit-null-label exp-mode { uniform | pipe }

    The mode used by the egress PE to process EXP values is configured.

    Either of the following modes can be used:

    • uniform: The egress PE copies the EXP value in an MPLS packet to the EXP field in the IP or inner packet.
    • pipe: The egress PE does not copy the EXP value in an MPLS packet to the EXP field in the IP or inner packet.

  6. Run:

    commit

    The configuration is committed.

Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101373

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next