No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling Traffic Statistics Collection for Automatic Tunnels

(Optional) Enabling Traffic Statistics Collection for Automatic Tunnels

A device can be enabled to collect traffic statistics on RSVP-TE tunnels that are established by the PCE Initiated LSP protocol.


To view traffic information about an automatic tunnel, perform the following steps to enable a device to collect traffic statistics on the automatic tunnel.


  1. Run:


    The system view is displayed.

  2. Run:


    MPLS is enabled, and the MPLS view is displayed.

  3. Run:


    The system view is displayed.

  4. Run:

    mpls traffic-statistics

    MPLS traffic statistics collection is enabled globally, and the traffic statistics view is displayed.

  5. Run:

    te auto-primary-tunnel pce-initiated-lsp

    Traffic statistics collection for automatic tunnels is enabled.

  6. Run:


    The configuration is committed.

Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101558

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next