No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configurations

Checking the Configurations

After configuring the ip-prefix tunnel function, check the tunnel information, including the tunnel status, a P2P TE tunnel template used to establish tunnels, and IP prefix list.


The ip-prefix tunnel function has been configured.


Table 3-3  Items to be checked and related commands



Check the configuration of a P2P TE tunnel template.

display mpls te p2p-template

Check whether P2P TE tunnels are successfully established using the automatic primary tunnel function.

display mpls te tunnel

Check detailed information about the automatic primary tunnel function.

display mpls te tunnel-interface [ auto-primary-tunnel [ tunnel-name ] ]

Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101713

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next