No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an RSVP Timer

Configuring an RSVP Timer

An RSVP timer is configured to define the interval at which Path and Resv messages are refreshed, and the timeout multiplier associated with the RSVP blocked state is also configured.


  1. Run:


    The system view is displayed.

  2. Run:


    The MPLS view is displayed.

  3. Run:

    mpls rsvp-te timer refresh interval

    The interval at which Path and Resv messages are refreshed is set.


    If the refresh interval is modified, the modification takes effect after the existing refresh timer expires. Do not set a long refresh interval or frequently modify a refresh interval.

  4. Run:

    mpls rsvp-te keep-multiplier number

    The PSB and RSB timeout multiplier is set.

  5. Run:


    The configurations are committed.

Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101921

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next