No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling RSVP-TE Reservation Confirmation

Enabling RSVP-TE Reservation Confirmation

RSVP-TE reservation confirmation configured on the egress of a tunnel verifies that resources are successfully reserved.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    mpls

    The MPLS view is displayed.

  3. Run:

    mpls rsvp-te resvconfirm

    RSVP-TE reservation confirmation is enabled.

    After a node receives a Path message, it initiates reservation confirmation by sending a Resv message carrying an object that requests for reservation confirmation.

    NOTE:

    Receiving ResvConf messages does not mean that resource reservation is successful. It means that, however, resources are reserved successfully only on the farthest upstream node where this Resv message arrives. These resources may be preempted by other applications later.

  4. Run:

    commit

    The configuration is committed.

Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101610

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next