No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing the PSB and RSB Timeout Multiplier

Changing the PSB and RSB Timeout Multiplier

The PSB and RSB timeout multiplier defines the maximum number of signaling packets that can be discarded in a weak signaling environment.


  1. Run:


    The system view is displayed.

  2. Run:


    The MPLS view is displayed.

  3. Run:

    mpls rsvp-te keep-multiplier number

    The PSB and RSB timeout multiplier is set.


    Set the PSB and RSB timeout multiplier greater than or equal to 5. This setting prevents the PSB and RSB from aging or being deleted if the PSB and RSB fail to refresh when a great number of services are transmitted.

  4. Run:


    The configuration is committed.

Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 102531

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next