No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configurations

Checking the Configurations

After adjusting RSVP signaling parameters, you can view the refresh parameters, RSVP reservation confirmation status, RSVP Hello extension status, and RSVP timer parameters.

Prerequisites

RSVP signaling parameters has been adjusted.

Procedure

  • Run the display mpls rsvp-te command to check RSVP-TE configurations.
  • Run the display mpls rsvp-te psb-content [ ingress-lsr-id tunnel-id lsp-id ] command to check RSVP-TE PSB information .
  • Run the display mpls rsvp-te rsb-content [ ingress-lsr-id tunnel-id lsp-id ] command to check RSVP-TE RSB information.
  • Run the display mpls rsvp-te statistics { global | interface [ interface-type interface-number ] } command to check RSVP-TE statistics.

Example

Run the following commands to check the previous configurations.

Run the display mpls rsvp-te command to view RSVP-TE configurations. For example:

<HUAWEI> display mpls rsvp-te
LSR ID: 1.1.1.1
 Resv Confirmation Request: DISABLE
 RSVP Hello Extension: DISABLE
 Hello interval: 3 sec                 Max Hello misses: 4
 Path and Resv message refresh interval: 30 sec
 Path and Resv message refresh retries count: 3
 Blockade Multiplier: 4
 Graceful-Restart Capability: None

Run the display mpls rsvp-te psb-content command to view information about the RSVP-TE PSB. For example:

<HUAWEI> display mpls rsvp-te psb-content
==============================================================
                       The PSB Content
==============================================================
 Tunnel Addr: 3.3.3.3                     Exist time: 0h 32m 6s
 Tunnel ExtID: 4.4.4.4                    Session ID: 502
 Ingress LSR ID: 4.4.4.4                  Local LSP ID: 1688
 Previous Hop: ----                       Next Hop: 10.4.1.2
 Incoming / Outgoing Interface: ---- / GigabitEthernet1/0/0
 InLabel: NULL                            OutLabel: 16
 Send Message ID: 0                       Recv Message ID: 0
 Session Attribute-
   SetupPrio: 7                           HoldPrio: 7
   SessionAttrib: SE Style desired

 LSP Type: -
 FRR Flag: No protection                  Local RRO Flag: 0x0
 FRR Mode: -
 ERO Information-
      L-Type          ERO-IPAddr          ERO-PrefixLen          Label
   ERHOP_STRICT       10.4.1.2            32
   ERHOP_STRICT       10.2.1.2            32
   ERHOP_STRICT       3.3.3.3             32
 RRO Information-
   -----
 SenderTspec Information-
   Token bucket rate: 1250000
   Token bucket size: 1000
   Peak data rate: 1250000
   Minimum policed unit: 0
   Maximum packet size: 1500
 CT-BandWidth Information(Bytes/sec):
   CT0 Bandwidth:  1250000                CT1 Bandwidth:  0
   CT2 Bandwidth:  0                      CT3 Bandwidth:  0
   CT4 Bandwidth:  0                      CT5 Bandwidth:  0
   CT6 Bandwidth:  0                      CT7 Bandwidth:  0
 Path Message arrive on Unknown(0x0) from PHOP 0.0.0.0
 Path Message sent to NHOP 10.4.1.2 on GigabitEthernet1/0/0
 Resource Reservation OK



 LSP Statistics Information:
   SendPacketCounter  : 1627              RecvPacketCounter  : 0
   SendPathCounter    : 1627              RecvPathCounter    : 0
   SendResvCounter    : 0                 RecvResvCounter    : 0
   SendPathErrCounter : 0                 RecvPathErrCounter : 0
   SendResvErrCounter : 0                 RecvResvErrCounter : 0
   SendPathTearCounter: 0                 RecvPathTearCounter: 0
   SendResvTearCounter: 0                 RecvResvTearCounter: 0
   SendSrefreshCounter: 0                 RecvSrefreshCounter: 0

-------------------------------------------------------------------------------
                       The PSB Content
-------------------------------------------------------------------------------
 Tunnel Addr: 7.7.7.7                     Exist time: 19h 29m 46s
 Tunnel ExtID: 1.1.1.1                    Session ID: 116
 Ingress LSR ID: 1.1.1.1                  Local LSP ID: 34926
 Previous Hop: ----                       Next Hop: 12.1.1.2
 Incoming / Outgoing Interface: ---- / GigabitEthernet1/0/0
 InLabel: NULL                            OutLabel: 41988
 Send Message ID: 0                       Recv Message ID: 0
 Session Attribute:
   SetupPrio: 7                           HoldPrio: 7
   SessionAttrib: SE Style desired

 LSP Type: -    
 FRR Flag: No protection                  Local RRO Flag: 0x0
 FRR Mode: -    
 ERO Information:
      L-Type          ERO-IPAddr          ERO-PrefixLen          Label
   ERHOP_STRICT       12.1.1.2            32
   ERHOP_STRICT       24.1.1.2            32
   ERHOP_STRICT       24.1.1.4            32
 XRO Information:
      L-Type          XRO-IPAddr          XRO-PrefixLen          Attribute-Type
   XRO_Avoid          13.1.1.1            32                     Interface     
   XRO_Avoid          13.1.1.3            32                     Interface     
   XRO_Avoid          3.3.3.3             32                     Node          
   XRO_Avoid          35.1.1.3            32                     Interface     
   XRO_Avoid          35.1.1.5            32                     Interface     
   XRO_Avoid          5.5.5.5             32                     Node          
   XRO_Avoid          57.1.1.5            32                     Interface     
   XRO_Avoid          57.1.1.7            32                     Interface     
 SenderTspec Information-
   Token bucket rate: 0
   Token bucket size: 1000
   Peak data rate: 0
   Minimum policed unit: 1
   Maximum packet size: 1500
 CT-BandWidth Information(Bytes/sec):
   CT0 Bandwidth:  0                      CT1 Bandwidth:  0
   CT2 Bandwidth:  0                      CT3 Bandwidth:  0
   CT4 Bandwidth:  0                      CT5 Bandwidth:  0
   CT6 Bandwidth:  0                      CT7 Bandwidth:  0
 Path Message arrive on Unknown(0x0) from PHOP 0.0.0.0
 Path Message sent to NHOP 12.1.1.2 on GigabitEthernet1/0/0
 Resource Reservation OK

                
 LSP Statistics Information:
   SendPacketCounter  : 1615              RecvPacketCounter  : 0
   SendPathCounter    : 1615              RecvPathCounter    : 0
   SendResvCounter    : 0                 RecvResvCounter    : 0
   SendPathErrCounter : 0                 RecvPathErrCounter : 0
   SendResvErrCounter : 0                 RecvResvErrCounter : 0
   SendPathTearCounter: 0                 RecvPathTearCounter: 0
   SendResvTearCounter: 0                 RecvResvTearCounter: 0
   SendSrefreshCounter: 0                 RecvSrefreshCounter: 0

Run the display mpls rsvp-te rsb-content command to view information about the RSVP-TE RSB. For example:

<HUAWEI> display mpls rsvp-te rsb-content
==============================================================
                       The RSB Content
==============================================================
 Tunnel Addr: 3.3.3.3                     Session Tunnel ID: 502
 Tunnel ExtID: 4.4.4.4
 Next Hop: 10.4.1.2                       Reservation Style: SE Style
 Reservation Incoming Interface: GigabitEthernet1/0/0
 Reservation Interface: GigabitEthernet1/0/0
 Message ID: 0
 Filter Spec Information-
   The filter number: 1
   Ingress LSR ID: 4.4.4.4         Local LSP ID: 1688    OutLabel: 16
   Cleanup Timer : -
   RRO Information-
   -----
 FlowSpec Information-
   Token bucket rate: 1250000
   Token bucket size: 1000
   Peak data rate: 1250000
   Minimum policed unit: 0
   Maximum packet size: 1500
   Bandwidth guarantees: 0
   Delay guarantees: 0
   Qos Service is Controlled  
 Resv Message arrive on GigabitEthernet1/0/0 from NHOP 10.4.1.2

Run the display mpls rsvp-te statistics global command to view RSVP-TE statistics. For example:

<HUAWEI> display mpls rsvp-te statistics global
--------------------------------------------------------------------------
                 RSVP-TE Global Statistic
--------------------------------------------------------------------------
 LSR ID: 4.4.4.4                        LSP Count: 2
 PSB Count: 2                           RSB Count: 2
 RFSB Count: -
FRR statistics information:
 PLR AvailLsps: 0                       PLR InuseLsps: 0
 MP AvailLsps: 0                        MP InuseLsps: 0
Total Statistics Information:
 PSB CleanupTimeOutCounter: 0           RSB CleanupTimeOutCounter: 0
 SendPacketCounter: 125                 RecPacketCounter: 116
 SendCreatePathCounter: 3               RecCreatePathCounter: 0
 SendRefreshPathCounter: 115            RecRefreshPathCounter: 0
 SendCreateResvCounter: 2               RecCreateResvCounter: 2
 SendRefreshResvCounter: 0              RecRefreshResvCounter: 113
 SendResvConfCounter: 0                 RecResvConfCounter: 0
 SendHelloCounter: 0                    RecHelloCounter: 0
 SendAckCounter: 0                      RecAckCounter: 0
 SendPathErrCounter: 0                  RecPathErrCounter: 1
 SendResvErrCounter: 0                  RecResvErrCounter: 0
 SendPathTearCounter: 1                 RecPathTearCounter: 0
 SendResvTearCounter: 0                 RecResvTearCounter: 0
 SendSrefreshCounter: 0                 RecSrefreshCounter: 0
 SendAckMsgCounter: 0                   RecAckMsgCounter: 0
 SendChallengeMsgCounter: 0             RecChallengeMsgCounter: 0
 SendResponseMsgCounter: 0              RecResponseMsgCounter: 0
 SendErrMsgCounter: 0                   RecErrMsgCounter: 0
 SendRecoveryPathMsgCounter: 0          RecRecoveryPathMsgCounter: 0
 SendGRPathMsgCounter: 0                RecGRPathMsgCounter: 0
 SendNotifyMsgCounter: 0                RecNotifyMsgCounter: 0
 ResourceReqFaultCounter: 0            
 Bfd neighbor count: 0                  Bfd session count: 0
Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101469

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next