No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting RSVP Authentication Lifetime

(Optional) Setting RSVP Authentication Lifetime

The RSVP authentication lifetime is set to prevent RSVP authentication from being prolonged when CR-LSP flapping causes frequent re-establishment of RSVP neighbor relationships and repeatedly performed handshake.

Context

RSVP neighbors retain an RSVP neighbor relationship within a specified RSVP authentication lifetime even if there are no CR-LSPs between the RSVP neighbors. Configuring the RSVP authentication lifetime does not affect existing CR-LSPs.

Procedure

  • Configuring RSVP authentication lifetime in the interface view
    1. Run:

      system-view

      The system view is displayed.

    2. Run:

      interface interface-type interface-number

      The view of an RSVP-enabled interface is displayed.

    3. Run:

      mpls rsvp-te authentication lifetime lifetime

      The RSVP authentication lifetime is set.

    4. Run:

      commit

      The configuration is committed.

  • Configuring RSVP authentication lifetime in the MPLS RSVP-TE peer view
    1. Run:

      system-view

      The system view is displayed.

    2. Run:

      mpls

      The MPLS view is displayed.

    3. Run:

      mpls rsvp-te peer ip-address

      The MPLS RSVP-TE peer view is displayed.

      If ip-address is an interface IP address of the neighbor, not the neighbor LSR ID, key authentication will only take effect on that neighbor interface. Key authentication then provides high security and has the highest priority.

      If ip-address is a neighbor LSR ID, key authentication will take effect on all interfaces on the neighbor. Authentication configured using this method has a lower priority than that configured based on the neighbor's interface IP address but has a higher priority than that configured in the interface view.

    4. Run:

      mpls rsvp-te authentication lifetime lifetime

      The RSVP authentication lifetime is set.

    5. Run:

      commit

      The configuration is committed.

Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 102071

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next