No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adjusting Parameters for Establishing an MPLS TE Tunnel

Adjusting Parameters for Establishing an MPLS TE Tunnel

Multiple attributes are used to establish MPLS TE tunnels flexibly.

Usage Scenario

During the establishment of an MPLS TE tunnel, special configurations are required.

Pre-configuration Tasks

Before adjusting parameters for establishing an MPLS TE tunnel, configure an RSVP-TE tunnel.

Configuration Procedures

Perform one or more of the following configurations as required.

Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 103132

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next