No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configurations

Checking the Configurations

After configuring P2MP TE Auto FRR, check P2MP TE Auto FRR information.


P2MP TE Auto FRR has been configured.


  • Run the display mpls te p2mp tunnel frr [ tunnel-name ] [ lsp-id ingress-lsr-id session-id local-lsp-id [ s2l-destination leaf-address ] ] command to check bypass tunnel attributes.


After completing the configurations, run the display mpls te p2mp tunnel frr command on the point of local repair (PLR) to view the bypass tunnel status and bypass tunnel attributes.

<HUAWEI> display mpls te p2mp tunnel frr
 Tunnel Interface Name : Tunnel10
 Lsp ID : :1 :9
 S2L Dest Addr:
 Sub-Group Originator ID:    Sub-Group ID:257
 Bypass In Use           :  Not Exists
 Bypass Tunnel ID        :  0
 BypassTunnel            :  -
 Bypass LSP ID           :  -           
 FrrNextHop              :  -
 Bypass Attribute(Not configured)
 Setup Priority          :  -            
 Hold Priority           :  -           
 HopLimit                :  -           
 Bandwidth               :  -           
 IncludeAnyGroup         :  -          
 ExcludeAnyGroup         :  -           
 IncludeAllGroup         :  -           
 Tunnel Interface Name : Tunnel10
 Lsp ID : :1 :10
 S2L Dest Addr:
 Sub-Group Originator ID:    Sub-Group ID:258
 Bypass In Use           :  Not Used
 Bypass Tunnel ID        :  32769
 BypassTunnel            :  Tunnel Index[AutoTunnel32769], InnerLabel[32769]
 Bypass LSP ID           :  11          
 FrrNextHop              :
 Bypass Attribute
 Setup Priority          :  7           
 Hold Priority           :  7
 HopLimit                :  32          
 Bandwidth               :  0
 IncludeAnyGroup         :  0           
 ExcludeAnyGroup         :  0
 IncludeAllGroup         :  0
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101367

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next