No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Protection Switching Trigger Mechanism

(Optional) Configuring the Protection Switching Trigger Mechanism

This section describes how to configure the protection switching trigger mechanism for a tunnel protection group to forcibly switch traffic to the working or protection tunnel. Alternatively, you can perform a traffic switchover manually.

Context

Read switching rules before configuring the protection switching trigger mechanism.

Perform the following steps on the ingress of the tunnel protection group as needed:

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    interface tunnel interface-number

    The tunnel interface view is displayed.

  3. Select one of the following protection switching trigger methods as required:

    • To switch traffic to the protection tunnel, run:

      mpls te protect-switch manual
    • To cancel the configuration of the protection switching trigger mechanism, run:
      mpls te protect-switch clear
    NOTE:

    The preceding commands can take effect immediately after being run, without the commit command executed.

Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101030

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next