No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an RSVP GR Helper

Configuring an RSVP GR Helper

An RSVP GR Helper is configured to allow devices along an RSVP-TE tunnel to retain RSVP sessions during a master/backup switchover.

Usage Scenario

The NE40E can only function as a GR Helper to help a neighbor node to complete RSVP GR. The RSVP GR Helper needs to be configured only after GR is enabled on the neighbor node that supports the RSVP GR Restarter. If a local device is only connected to NE40Es running the same version with the local device, there is no need to configure the RSVP GR Helper on the local device.

Pre-configuration Tasks

Before configuring an RSVP GR Helper, configure an RSVP-TE tunnel.

Configuration Procedures

Figure 3-15  RSVP GR Helper configuration
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101201

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next