No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the RSVP Hello Extension

Enabling the RSVP Hello Extension

The RSVP Hello extension is configured on a GR node and its neighbor to rapidly monitor reachability between these RSVP nodes.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    mpls

    The MPLS view is displayed.

  3. Run:

    mpls rsvp-te hello

    The RSVP Hello extension is enabled globally.

  4. Run:

    quit

    The system view is displayed.

  5. Run:

    interface interface-type interface-number

    The view of an RSVP-enabled interface is displayed.

  6. Run:

    mpls rsvp-te hello

    The RSVP Hello extension is enabled on an interface.

    After RSVP Hello extension is enabled globally on a node, enable the RSVP Hello extension on each interface of the node.

  7. Run:

    commit

    The configuration is committed.

Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 102251

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next