No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Hello Session Between RSVP GR Nodes

(Optional) Configuring a Hello Session Between RSVP GR Nodes

If TE FRR is deployed, a Hello session must be established between a PLR and an MP. A Hello session must be manually established if it cannot be automatically established between RSVP neighboring nodes.


  1. Run:


    The system view is displayed.

  2. Run:


    The MPLS view is displayed.

  3. Run:

    mpls rsvp-te

    RSVP-TE is enabled.

  4. Run:

    mpls rsvp-te hello

    The RSVP Hello extension is enabled on the local node.

  5. Run:

    mpls rsvp-te hello nodeid-session ip-address

    A Hello session is established between two RSVP neighboring nodes.

    The ip-address parameter specifies the LSR ID of an RSVP neighboring node.

  6. Run:


    The configurations are committed.

Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101198

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next