No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configurations

Checking the Configurations

After configuring RSVP GR, you can verify that the TE tunnel properly forwards data during the GR process.

Prerequisites

RSVP GR has been configured.

Procedure

  • Run the display mpls rsvp-te graceful-restart command to check the RSVP-TE GR status.
  • Run the display mpls rsvp-te graceful-restart peer [ { interface interface-type interface-number | node-id } [ ip-address ] ] command to check information about the RSVP GR status on a neighbor.

Example

Run the following commands to check the previous configurations.

Run the display mpls rsvp-te graceful-restart command to view the RSVP GR status on the local node.

<HUAWEI> display mpls rsvp-te graceful-restart
Display Mpls Rsvp te graceful restart information
 LSR ID: 3.3.3.3
 Graceful-Restart Capability:    GR-Support
 Restart Time:  90000 Milli Second
 Recovery Time: 0 Milli Second
 GR Status:  Gracefully Restart Not going on
 Number of Restarting neighbors: 0
 Received Gr Path message count: 0
 Send Gr Path message count: 0
 Received RecoveryPath message count: 0
 Send RecoveryPath message count: 0

Run the display mpls rsvp-te graceful-restart peer command to view the RSVP GR status on a neighbor.

<HUAWEI> display mpls rsvp-te graceful-restart peer
Remote Node id Neighbor
 Neighbor Addr: 2.2.2.2
 SrcInstance: 0xFE88AC7E             NbrSrcInstance: 0x0
 Neighbor Capability:
                      No Gr capabilities
 GR Status:           Normal
 Restart Time: 0 Millisecond
 Recovery Time: 0 Millisecond
 Stored GR message number: 0

Neighbor on Interface GigabitEthernet1/0/0
 Neighbor Addr: 2.1.1.2
 SrcInstance: 0xFE88AC7E             NbrSrcInstance: 0x0
 Neighbor Capability:
                      No Gr capabilities
 GR Status:           Normal
 Restart Time: 0 Millisecond
 Recovery Time: 0 Millisecond
 Stored GR message number: 0
Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101047

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next