No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Entropy Label for Global Tunnels

Configuring the Entropy Label for Global Tunnels

The entropy label can be configured to global tunnels to improve load balancing performance.


If severe load imbalance occurs, the entropy label can be configured for global tunnels to help transit nodes properly load-balance traffic. The entropy label capability is enabled on the egress for tunnels. An entropy label is configured in the tunnel interface view to confirm the tunnel entropy label requirement, and the ingress sends the requirement to the forwarding plane for processing.


  1. Run:


    The system view is displayed.

  2. Run:


    The MPLS view is displayed.

  3. Run:

    mpls te

    MPLS TE is globally enabled.

  4. Run:

    mpls te entropy-label rsvp-te

    The entropy label is configured for global tunnels.

  5. Run:


    The configuration is committed.

Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 102377

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next