No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting BFD Parameters on the Ingress

Setting BFD Parameters on the Ingress

After setting BFD parameters on the ingress, you can use BFD sessions to monitor a TE tunnel.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    bfd session-name bind mpls-te interface interface-type interface-number [ one-arm-echo ]

    BFD is configured to monitor a TE tunnel.

    When the TE tunnel is in the Down state, a BFD session cannot be established.

  3. Run:

    discriminator local discr-value

    The local discriminator of the BFD session is set.

  4. Run:

    discriminator remote discr-value

    The remote discriminator of the BFD session is set.

    This command cannot be run for a one-arm-echo session.

    NOTE:

    The local discriminator of the local device and the remote discriminator of the remote device are the same. The remote discriminator of the local device and the local discriminator of the remote device are the same. A discriminator inconsistency causes the BFD session to fail to be established.

  5. (Optional) Run:

    min-tx-interval interval

    The local minimum interval at which BFD packets are sent is set.

    This command cannot be run for a one-arm-echo session.

    • Effective local interval at which BFD packets are sent = MAX { Configured local interval at which BFD packets are sent, Configured remote interval at which BFD packets are received }
    • Effective local interval at which BFD packets are received = MAX { Configured remote interval at which BFD packets are sent, Configured local interval at which BFD packets are received }
    • Effective local detection interval = Effective local interval at which BFD packets are received x Configured remote detection multiplier

    For example:

    • The local interval at which BFD packets are sent is set to 200 ms, the local interval at which BFD packets are received is set to 300 ms, and the local detection multiplier is set to 4.

    • The remote interval at which BFD packets are sent is set to 100 ms, the remote interval at which BFD packets are received is set to 600 ms, and the remote detection multiplier is set to 5.

    Then,

    • Effective local interval at which BFD packets are sent = MAX { 200 ms, 600 ms } = 600 ms; effective local interval at which BFD packets are received = MAX { 100 ms, 300 ms } = 300 ms; effective local detection period = 300 ms x 5 = 1500 ms

    • Effective remote interval at which BFD packets are sent = MAX { 100 ms, 300 ms } = 300 ms; effective remote receiving interval = MAX { 200 ms, 600 ms } = 600 ms; effective remote detection period = 600 ms x 4 = 2400 ms

  6. (Optional) Run:

    min-rx-interval interval

    The local minimum interval at which BFD packets are received is set.

    For a one-arm-echo session, run the min-echo-rx-interval interval command to configure the minimum interval at which the local device receives BFD packets.

  7. (Optional) Run:

    detect-multiplier multiplier

    The BFD detection multiplier is set.

  8. Run:

    commit

    The configurations are committed.

Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 102508

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next