No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configurations

Checking the Configurations

After configuring static BFD for TE, you can view configurations, such as the status of the BFD sessions.

Prerequisites

Static BFD for TE has been configured.

Procedure

  • Run the display bfd session mpls-te interface tunnel-name [ verbose ] command to check information about BFD sessions on the ingress.
  • Run the following commands to check information about BFD sessions on the egress.

    • Run the display bfd session all [ for-ip | for-lsp | for-te ] [ verbose ] command to check information about all BFD sessions.
    • Run the display bfd session static [ for-ip | for-lsp | for-te ] [ verbose ] command to check information about static BFD sessions.
    • Run the display bfd session peer-ip peer-ip [ vpn-instance vpn-name ] [ verbose ] command to check information about BFD sessions with reverse IP links.
    • Run the display bfd session ldp-lsp peer-ip peer-ip [ nexthop nexthop-ip [ interface interface-type interface-number ] ] [ verbose ] command to check information about BFD sessions with reverse LDP LSPs.
    • Run the display bfd session mpls-te interface tunnel-name te-lsp [ verbose ] command to check information about BFD sessions with reverse CR-LSPs.
    • Run the display bfd session mpls-te interface tunnel-name [ verbose ] command to check information about BFD sessions with reverse TE tunnels.

  • Run the following commands to check BFD statistics.

    • Run the display bfd statistics session all [ for-ip | for-lsp | for-te ] command to check statistics about all BFD sessions.
    • Run the display bfd statistics session static [ for-ip | for-lsp | for-te ] command to check statistics about static BFD sessions.
    • Run the display bfd statistics session peer-ip peer-ip [ vpn-instance vpn-name ] command to check statistics about BFD sessions with reverse IP links.
    • Run the display bfd statistics session ldp-lsp peer-ip peer-ip [ nexthop nexthop-ip [ interface interface-type interface-number ] ] command to check statistics about BFD sessions with reverse LDP LSPs.
    • Run the display bfd statistics session mpls-te interface interface-type interface-number te-lsp command to check statistics about BFD sessions with reverse CR-LSPs.

Example

After completing the configurations, run the display bfd session command. The command output shows that the BFD session status is Up, and the BFD session type is S_TE_TNL.

<HUAWEI> display bfd session discriminator 10
(w): State in WTR 
(*): State is invalid
--------------------------------------------------------------------------------
Local  Remote PeerIpAddr        State     Type             InterfaceName
--------------------------------------------------------------------------------
10     20     3.3.3.3           Up      S_TE_TNL        Tunnel10
--------------------------------------------------------------------------------

Run the display bfd statistics session all command to view statistics about all BFD sessions.

<HUAWEI> display bfd statistics session all
(w): State in WTR 
(*): State is invalid
------------------------------------------------------------------------------
  State : Up                     Name : atob
------------------------------------------------------------------------------
  Session Type                        : Static
  Bind Type                           : TE_LSP
  Local/Remote Discriminator          : 10/20
  Received Packets                    : 1710577
  Sent Packets                        : 1710593
  Received Bad Packets                : 0
  Sent Failed Packets                 : 0
  Down Count                          : 0
  ShortBreak Count                    : 0
  Sent Lsp Ping Count                 : 0
  Create Time                         : 2012-11-17 12:11:03
  Last Down Time                      : 0000/00/00 00:00:00
  Down Status Lasting Time            : -D:--H:--M:--S
  Last Up Time                        : 2012-11-17 21:14:50 
  Last Up Lasting Time                : ---D:--H:--M:--S
  Total Time From Create              : 0D:09H:03M:47S
--------------------------------------------------------------------------------

     Total Session Number :  1
Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 102535

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next