No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking a TE Tunnel Using NQA

Checking a TE Tunnel Using NQA

After configuring MPLS TE, you can use Network Quality Analysis (NQA) to check the connectivity and jitters of a TE tunnel.


For information about configurations for monitoring a TE tunnel using NQA, see "NQA Configuration" in HUAWEI NetEngine40E Universal Service Router Configuration Guide - System Management.

Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 102842

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next