No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting the RSVP Process

Resetting the RSVP Process

Resetting the RSVP process triggers a node to re-establish all RSVP CR-LSPs or verify the RSVP process.



Resetting the RSVP process causes all RSVP CR-LSPs to be torn down and re-established.


  1. Run the reset mpls rsvp-te command in the user view to reset the RSVP process.
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101503

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next